Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[i260]

Firstly, are these the right pcd and secondly will 245/40/19 and 275/35/19's cause any rubbing problems on a Mig?

I have worked out that they are about 3% larger rolling radius than the 225/55/16's, which I think are the largest RR of the std fit tyres.

Cheers.

[i260]

bump

These seem to be coming up regularly on ebay - could look fab if they have the right offset.

[I_want_an_Omega]

What would it do to your insurance?

[Diamond Black Geezer]

Monaros use BMW PCD, sadly, (as this was always my idea, putting Monaro wheels on)..... I assume Holden use the same the PCD on the new VXR8 model, too.

[Ian_D]

Monaros use BMW PCD, sadly, (as this was always my idea, putting Monaro wheels on)..... I assume Holden use the same the PCD on the new VXR8 model, too.

Really Then again, I just assumed they would be 110 PCD.

[ENFIELD_MV6]

have a read here from what i can see they are 120 pcd and as said bmw (bmw have bigger centre hole)

http://www.hsv.org.uk/topic.asp?t=664208&f=69&h=27

[i260]

thanks guys!

[kingplym]

just out of interest is that a yes he can use them? or no he cant?

i dont know what a pcd is?

[MV6Matt]

just out of interest is that a yes he can use them? or no he cant?

i dont know what a pcd is?

The answer is no you cant as the PCD is a different size

PCD (it's german IIRC) is the size of the circumference of the bolt pattern that hold the wheel on (in cm)

Vauxhalls use a stud pattern of 110 cm for their 5 hole alloys

It would seem from the Holden thread that they are 120 (same as a BMW) but the centre is a different size.

'wobbly-bolts' would not be a good idea and are generally only suitable + or - 2mm ie on wheels of 108 or 112 pcd.

HTH

Matthew

[hutchyp]

PCD - Pitch Circle Diameter.

Used to sell & fit alloys in my youth.