Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Colin G]

Have decided to get my spanners out and have a go at my cambelt.  One thing I'm not sure of is TDC.  I understand about the crank locking tool etc., but can someone confirm that provided the Crank locking Tool is on that this is TDC and that I don't have to worry about any other marks or whether it's on piston 1 etc? Have watched the excellent vid about 3 times now - and will have my laptop available under the bonnet when I do the job.

Sorry if this sounds a silly question but last time I did something like this on an old Hilman Super Minx I managed to get the timing 180degs out 

Cheers

col

[Welung666]

Once you have the Aux pulley off the crank you will feel a notch in the end of the crank at the 6 o'clock position. The locking tool sticks out at 12 o'clock so you can't really go wrong.

Use a small mirror and a torch to align the double lines on the new cam belt to this notch (a line on each edge of the notch)

[tidla]

[Welung666]

Excellent pic Tapper, it shows exactly what I struggled to describe

[Colin G]

Thanks guys - easy peasy