46
Omega General Help / Re: Tachometer/speedo dash light out.........
« on: 30 August 2009, 16:39:39 »
Hi there - would also recommend removing the steering cowl to make things a bit easier. 
- 15 July 2025, 21:48:57
- Welcome, Guest
News:
Please play nicely. No one wants to listen/read a keyboard warriors rants....
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
47
Omega General Help / Re: Self levelling Suspension
« on: 29 August 2009, 15:11:07 »
Thanks for the reply
48
Omega General Help / Self levelling Suspension
« on: 29 August 2009, 01:22:44 »
Can anyone recommend a good set of springs and shocks for my 3.2 Saloon and a place to purchase them from, it has self levelling suspension, I have noticed that the O/S/R self levelling shock is wet. Will possibly consider lowering it.
49
Omega General Help / Re: 'F' showing on display??
« on: 12 August 2009, 16:02:58 »
Have had this coming up on mine when I also had it on range and the abs ecu was faulty once I replaced the ecu all was sorted.
51
Omega General Help / Re: Replacing springs
« on: 26 August 2009, 17:22:37 »
Can anyone recommend a good set of springs and shocks (front and back) for my estate, also need new rear self levelling shocks for the saloon 
, is it both the shocks and the springs that are different in the rear of the estate was thinking of putting new shocks and springs on the saloon and putting the old ones onto the estate. :-/
, is it both the shocks and the springs that are different in the rear of the estate was thinking of putting new shocks and springs on the saloon and putting the old ones onto the estate. :-/
52
Omega General Help / Replacing springs
« on: 25 August 2009, 21:40:47 »
Hi all need to change springs in my 2.5 v6 estate, it's a bit boaty - should I change the shocks while I'm at it, car has about 150K miles on it.
Also can anyone recommend a set of spring compressors or will any do?
ps is there any how to's on this? need to change fronts and rears.
Thanks in advance m8y's.
Also can anyone recommend a set of spring compressors or will any do?
ps is there any how to's on this? need to change fronts and rears.
Thanks in advance m8y's.
53
Omega General Help / Re: Idle speed
« on: 24 August 2009, 23:55:28 »
Thanks guys - good cleaning of breathers required - will this cure the oil leaking into the plug wells or is gaskets also required?
54
Omega General Help / Idle speed
« on: 24 August 2009, 21:03:24 »
Hi all have noticed my 2.5 V6 idles at a high rev when cold (about 1400 rpm) is there any way to reduce this?
55
Omega General Help / Re: Oil in plug wells
« on: 24 August 2009, 20:56:51 »
I changed oil about a fortnight ago so oil is nice and clean although oil in plug wells is dirty.
Is there any way of checking if breathers are blocked - someone suggested if oil is spitting from dipstick that is an indicator.
Is there any way of checking if breathers are blocked - someone suggested if oil is spitting from dipstick that is an indicator.
56
Omega General Help / Oil in plug wells
« on: 24 August 2009, 20:45:43 »
Hi all decided to change spark plugs in the 2.5 V6 Omega today to find that on two of the passenger side plug wells (not the middle one) there was oil in them, not too much in the front one but quite a bit in the back one - what's your thoughts? - drivers side clean as a whistle.
57
Omega General Help / Re: ABS ECU
« on: 19 August 2009, 18:54:12 »
Good stuff - glad you're sorted.
58
Omega General Help / Re: ABS ECU
« on: 13 August 2009, 22:02:18 »
The screws are either M4 or M5 screws about 30mm long and should be easy to get on ebay, hardware shop etc, also BBA Reman should be able to provide spares.
59
Omega General Help / Re: ABS ECU
« on: 13 August 2009, 13:26:53 »
bit of masking tape over them would have been cheaper though - LOL.
Have a good haggle with him hopefully he'll knock a bit off for you - good luck.
Have a good haggle with him hopefully he'll knock a bit off for you - good luck.
60
Omega General Help / Re: ABS ECU
« on: 13 August 2009, 12:02:58 »
That's unfortunate but the large plug should have been removed first (if it could have been) as it allows for better access to the bottom screws, at the least you would have saved the time at the screws, it's a pity it didn't work out for you but I hope you have it sorted with minimal expense, I feel you are looking at a day or so's labour, you would be better to get a quote first, at least then you know where you stand.
Good luck mate.
Good luck mate.